Tunturi E85S Assembly, Welcome to the World Tunturi Exercising, Interface see E85 Pictures

or negligence of adjustment or maintenance instructions described in this manual.

• The equipment must not be used by persons weighing over 135 kg.

• Make sure the equipment is unplugged before carrying out any assembly or maintenance procedures.

• Do not attempt any servicing or adjustments other than those described in this guide. Everything else must

be left to someone familiar with the maintenance of electromechanical equipments and authorised under the laws of the country in question to carry out maintenance and repair work.

• This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

SAVE THIS INSTRUCTION MANUAL

WELCOME TO THE WORLD OF

TUNTURI EXERCISING!

Your choice shows that you really want to invest in your well being and condition; it also shows you really value high quality and style. With Tunturi Fitness Equipment, you’ve chosen a high quality, safe and motivating product as your training partner. Whatever your goal in training, we are certain this is the training equipment to get you there. You’ll find information about using your exercise equipment and what makes for efficient training at Tunturi’s website at www.tunturi.com.

O W N E R ’ S M A N U A L • E 8 5 S E 8 5

ASSEMBLY

Start by unpacking the equipment and check that you have the following parts:

1.Frame

2.Rear and front support (E85)

3.Handlebar (E85)

4.Pedals (2 pcs) (E85)

5.Interface

6.Transformer

7.Assembly kit (contents marked with in the spare part list): keep the assembly tools, as you may need them e.g. for adjusting the equipment.

If necessary, please contact your dealer with the model, equipment serial no. and spare part no. of the missing part. You’ll find a spare part list at the back of this guide. The packaging includes a silicate bag for absorbing moisture during storage and transportation. Please dispose of the bag once you have unpacked the equipment. The directions left, right, front and back are defined as seen from the exercising position.

E85S

INTERFACE (SEE E85 PICTURES)

1.Connect the cable from the handlebar support tube to the interface connector.

2.Handgrip pulse version: connect the cable from the handlebar tube to the interface cable.

3.Push the interface carefully into place at the top of the handlebar support tube.

4.Make sure that the moduleis correctly in place and tighten the fastening screws.

E85

REAR SUPPORT

1.Place the support under the rear part of the frame. Fasten it with two hex screws and washers.

2.Place the decorative plugs over the two hex screws.

HANDLEBAR SUPPORT TUBE

NOTE! The fastening screws are ready-mounted, so please do not loosen them.

1.Expose the wire coming from the frame tube by unwrapping the orange tape that covers it, and then connect it to the wire from the handlebar support tube.

GB

3