2.With the paper coming off the bottom of the roll, facing the back of the Superprint Pro80 LVD, feed the edge of the paper into the slot on the back until it stops.

3.

Turn the Superprint Pro80 LVD on, then press the

Enter

 

the rollers grab the paper and feed it through the printer.

key several times until

4.Feed the paper through the slot in the printer cover and replace the printer cover.

5.The two open ends of the paper holder fit into the holes on each side of the paper roll. Pull the two ends apart in order to fit the paper roll between them. The spring action of the holder will keep the paper on it. You may need to remove the paper holder from the Superprint Pro80 LVD in order to install the roll of paper. To replace the paper holder, snap it back onto the bottom of the TTY.

Paper Holder

Step 5

 

Step 1

 

 

 

Step 4

Step 2

Step 3

When opening a new roll of paper.

New rolls of paper may have some glue on the first few inches. This glue, which helps keep the paper rolled during shipment, can interfere with printing. Make sure paper that has glue on it is fed past the printer and is

S E T U P • 1 1

Page 17
Image 17
Ultratec PRO80 manual When opening a new roll of paper