How do I use the Emergency button?
See Chapter 4, “Advanced Calling,” on page 27 to learn how to use the Emergency Dial button.
Program this button now so that you will be ready in an emergency (see
“Programming the Emergency Number” on page 27). Please note this button is already programmed with 911.
Redial the Last Number
1.Make sure the Superprint Pro80 LVD is on. The Power light should be lit.
2. Press the Dial button. NAME OR NUM> is displayed.
3.Press Enter to dial the number. REDIALING... is displayed followed by the telephone number.
NAME OR NUM> _
Dial
REDIALING...5551234
Enter
4.When the other TTY starts ringing, the message LINE IS RINGING flashes on the display.
If the other TTY is busy, LINE IS BUSY flashes on the display. Try again later to place the call or see “Automatically Redial a Busy Number” on page 17.
5.When the other person answers the call, his or her Greeting is displayed on your TTY. Type a reply to continue your conversation.
6.When your conversation is over, press On/Off . The screen is blank.
You can also hold down the Ctrl key and press the Esc button. This will hang up the call without turning off the Superprint Pro80 LVD.
1 6 • C A L L I N G & A N S W E R I N G