CHAPTER

3 CALLING & ANSWERING

PLACING A CALL

You have three options with the Dial button:

Type the number of the person you are calling.

Use a number that is stored in the Directory.

Redial the last number that was dialed.

Dial a Number that You Type

1.Make sure the Superprint Pro80 LVD is on. The Power light should be lit.

2. Press the Dial button. NAME OR NUM> is displayed.

3.Type the number you are calling. Use the Back Space key to correct mistakes.

4.Press Enter to dial the number. DIALING... is displayed followed by the telephone number.

5.When the other TTY starts ringing, the message LINE IS RINGING flashes on the display.

If the other TTY is busy, LINE IS BUSY is displayed. Try again later to place the call or see “Automatically Redial a Busy Number” on page 17.

NAME OR NUM> _

Dial

DIALING...5551234

Type...Enter

...Then press

.. LINE IS RINGING ..

C A L L I N G & A N S W E R I N G • 1 3

Page 19
Image 19
Ultratec PRO80 manual Calling & Answering, Placing a Call, Dial a Number that You Type