SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of fire, electrical shock and personal injury, always follow these basic safety precautions when using the Superprint Pro80 LVD.
General Precautions
●SAVE THESE INSTRUCTIONS!
●Read and understand all instructions.
●Follow all warnings and instructions on the Superprint Pro80 LVD.
●Unplug the Superprint Pro80 LVD from the wall outlet and refer servicing to qualified service personnel under the following conditions:
✔When the power supply cord or plug is damaged or frayed.
✔If liquid has been spilled into the TTY.
✔If the TTY has been exposed to rain or water.
✔If the TTY does not operate normally when the operating instructions are followed.
✔If the TTY has been dropped and/or damaged.
✔If the TTY exhibits a distinct change in performance.
●Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may damage the Superprint Pro80 LVD.
●To clean: Unplug the Superprint Pro80 LVD from the wall outlet. Use a damp cloth. Do not use liquid or aerosol cleaners.
●Do not use the Superprint Pro80 LVD near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.
●Always place the Superprint Pro80 LVD on a stable phone stand, table or other secure surface. Dropping the Superprint Pro80 LVD can result in serious damage to the equipment.
●The Superprint Pro80 LVD should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
●Do not allow anything to rest on the power cord. Do not position the Superprint Pro80 LVD where people can walk on the cord.
●Do not overload wall outlets and extension cords. This overloading can result in a fire or electric shock.
●Never attempt to open, disassemble or service the Superprint Pro80 LVD. All repairs should be performed by an authorized service center. Opening or removing covers exposes you to the risk of dangerous voltages and other hazards. If reassembled incorrectly, the Superprint Pro80 LVD can become an electrical shock hazard.
●Avoid using a telephone (other than a cordless type) during an electrical storm. There is a remote risk of electric shock from lightning.
●Do not use the telephone to report a gas leak in the vicinity of the leak.
●Ultratec recommends plugging your Superprint Pro80 into a
Battery precautions
●Use only the type and size battery specified in the instructions for your unit. NEVER USE NiMH OR ALKALINE RECHARGEABLE BATTERIES.
●Do not dispose of the batteries in a fire. Cells may explode. Check local codes for possible special disposal instructions.
●Do not open or mutilate the batteries. Battery electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
●Exercise care in handling batteries in order not to short them with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
i v • S A F E T Y I N S T R U C T I O N S
