Placing a Call Using Relay Dial
1.Make sure the Superprint Pro80 LVD is on. The Power light should be lit.
2.Press the Relay button. DIALING... is displayed followed by the number of the TRS (Telecommunications Relay Service) that you have programmed for this button.
3.When the Relay service TTY starts ringing, the Superprint Pro80 LVD Signal light flashes slowly and LINE IS RINGING is displayed.
4.When the CA (Communications Assistant) answers the call, his or her Greeting is displayed on your TTY. Type instructions for the CA such as the number and the name of the person you wish to call. The CA will dial the number of the person you are calling and type information such as whether the phone is ringing or busy.
5.When the person answers the phone, the CA will introduce the call and begin typing everything that the other person says.
6.When the other person says GA, begin typing what you want to say. The CA will read what you type to the person you are calling.
7.Continue your conversation.
3-WAY CALLING
Use Baudot code for 3–way calling.
Whenever you use
Ctrl and Shift keys then press B .
If your telephone service includes conference calling capabilities, the Superprint Pro80 LVD allows you to carry on a conversation with two other people.
1.Call the first person you wish to talk to.
2.When the first person answers the call, ask him or her to hold.
3. | Hold down the | Ctrl | and | Shift | keys then press F . HOOK FLASH is displayed | ||
|
|
| OR |
|
| ||
| briefly. Then, NAME | NUM is displayed. | |||||
4. | Type the phone number of the second person and press |
| . | ||||
Enter | |||||||
5.When the second person answers the call, ask him or her to hold while you reconnect the first person.
6. | Hold down the | Ctrl |
| calling conversation. | |
and
Shift
keys then press
F
. You now have a
7.Take turns as you would during a
A DVA N C E D C A L L I N G • 3 1
