Programming the Relay Voice Announcer Phone Number
1.Turn on the Superprint Pro80 LVD, the Power light should be lit.
2.Hold down the Program key and press Relay Voice . VOICE NUMBER> is displayed.
3.Type the number that a hearing person can call to reach your local TRS.
4.Press Enter . VOICE NUMBER SAVED is displayed.
SEND MEMO
What is a Memo?
A Memo is a short message that you save in the Superprint Pro80 LVD memory and later send to someone during a conversation. For information on saving and editing Memos, see Chapter 5 on p. 31.
1.At any point during a conversation when
it is your turn to type, press Send Memo .
SEND MEMO > is displayed (see Chapter 5 for more information on Saving
A Memo).
2.Begin typing the first few letters of the name of the Memo you want to send. When you have typed enough letters, the whole Memo name is displayed.
If you don’t remember what name is used
for the Memo, you can use the 
keys to look through the list of Memos.
3.Press Enter when the name of the desired Memo is displayed.
The Memo is sent and displayed the same way it would be if you were typing the message during the conversation.
4.Continue the conversation.
SEND MEMO> PIZZA
Send Memo
2 6 • A DVA N C E D C A L L I N G
