1.Hold down the

Program

key and press

Auto-Answer

. AA RINGS <2> is displayed.

2.Type the number of desired rings or “T” for Toll Saver. You can also press the Spacebar . The number of rings (<2> through <9>) or <TS> is displayed.

3.Press

Enter

to save this setting. AA RINGS SAVED is displayed.

TURNING OFF THE AUTO-ANSWER RELAY VOICE ANNOUNCER

(See page 25 for information about the Auto-Answer Relay Voice Announcer.)

1.Hold down the

Program

key and press

Auto-Answer

. AA RINGS <2> is displayed.

2.Press until AA VOICE < ON> is displayed.

3.Press the Spacebar to change the option to <OFF>. Then, press AA VOICE OFF is displayed.

Enter

.

Can I check messages when I am away from home?

Yes, remote message retrieval allows you to use another TTY when you are away from your Superprint Pro80 LVD to check your Auto-Answer messages. In order to use this function you must first save a password in your Superprint Pro80 LVD. You will be able to read your messages from another TTY location only if a password has been saved.

THE REMOTE MESSAGE RETRIEVAL OPTION

Saving a Password

1.Hold down the Program key and press Auto-Answer . AA RINGS <2> is displayed.

2.Press until CHANGE PASSWORD <NO> is displayed.

3.Press the Spacebar to change the option to <YES>. Then, press Enter . TYPE AA PASSWORD> is displayed.

4.Type your password. Your password can be up to 8 characters long and can include letters and numbers only. There is room for only one password.

5.Press

Enter

to save this setting. AA PASSWORD SAVED is displayed.

Reading Auto-Answer Messages Remotely

1.Before you leave, press have saved a password.

Auto-Answer

to turn Auto-Answer on and make sure you

4 0 • U S I N G A U TO - A N S W E R

Page 46
Image 46
Ultratec PRO80 manual Turning OFF the AUTO-ANSWER Relay Voice Announcer, Remote Message Retrieval Option, Saving a Password