Ultratec PRO80 Relay Dial with E-TURBO, Turning E-Turbo On, Turbo calls are more streamlined

RELAY DIAL WITH E-TURBO

This section is for people whose Telecommunications Relay Service (TRS) supports E–Turbo technology. Please refer to the next section, “Relay Dial (without E-Turbo),” if E–Turbo is not available in your area.

E-Turbo calls are more streamlined.

If your relay service is E-Turbo compatible, you can take advantage of the most streamlined way to call through relay. With E-Turbo, many of the details of a relay call are automatically handled for you:

1.You dial the phone number of the person you are calling. Your Superprint Pro80 automatically connects to your TRS.

2.There is no need to interact with the Communications Assistant (CA).

3.Your preferences are automatically sent to the TRS, such as your preference for a male or female CA or which long distance carrier to use.

Turning E-Turbo On

1.Press Options . CODE < AUTOMATIC> is displayed.

2.Press until E-TURBOis displayed.

3.Press the Spacebar to select <ON>.

4.Press

5.Press

Enter

Esc

. **E-TURBO ON** is displayed briefly.

to exit the Options menu.

Programming the E-Turbo Relay Phone Number

1.Check with your TRS for the best number to use for E-Turbo calls.

2.Turn on the Superprint Pro80 LVD.

3.Hold down the Program key and press Relay . RELAY NUMBER> is displayed.

4.Type the access number of your TRS. There is space for up to 20 characters. Use the Back Space key to correct mistakes.

5.Press

Enter

. ** RELAY NUMBER SAVED ** is displayed briefly.

Then, USER PREF is displayed.

6.Type the letter(s) of the relevant setting from the following chart.

2 8 • C H A P T E R T I T L E