Wayne-Dalton 5120 Attaching Disconnect Cables, Mounting Disconnect, Handle Bracket, Installation

24	Attaching Disconnect Cables
Tools Needed:	NOTE: See idrive® main installation and
Pliers	owners manual for idrive® parts.
	Attach the loose disconnect cable
	(located in opener hardware bag) to the
	opener with the “S” hook. Close both
	ends of the “S” hook (with pliers) to lock
	assembly together.
	Thread the disconnect cable (behind the
	counterbalance cable) through the hole
	in the right hand end bracket; remove
	all slack between opener and right end
	bracket.

S-Hook

Disconnect

Cable

Hole in Right

End Bracket

Right Side of

End Bracket

Hole in Close “S” Hook

End Bracket

INSTALLATION

25	Mounting Disconnect
	Handle Bracket
Tools Needed:	NOTE: See idrive® main installation and
Pencil
	owners manual for idrive® parts.
Tape measure	Mark a location on the right jamb, 6
1/8” Drill Bit
	feet above the floor to mount the
7/16” Socket	disconnect handle bracket.
Driver	Drill 1/8” pilot holes for the lag screws.
Power Drill

Align top of the bracket with the mark. Fasten bracket to the jamb with

(2) 1/4” x 1-1/2" lag screws.

6ft

(2) 1/4” x 1-1/2” Lag Screws

	Disconnect
	Handle Bracket
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.	25

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com