Wayne-Dalton 5120, 5140 installation instructions Package Contents

Package Contents	NOTE: Depending on the door model, some parts listed will not be supplied if not
	necessary. rear supports may or may not be included with your door.

DOOR SectionS (as required)

(2) Horizontal Angles

(21-15/16” or 80”)(1)TorqueMaster® Spring tube (as required)

(2) Quick Install RH/LH	(2) Horizontal Tracks RH/LH
Flagangle (as required)

asymmetrical u-bar	U-Bar	idrive® Operator	(2) Top Bracket Slides	right and left cable
				drum assemblies
(if included)	(if included)	(sold separately)

right & left	Q.I. Jamb Brackets	(1) operator bracket (2) Top Bracket Bases weather seals & nails	(2) Vertical
Drum Wraps	(As Required)	(if included)	Tracks RH/LH

right & left	36 Tooth Worm Gear	Counter Covers	Counter Gears	Rollers	(1) Center Bracket
End Brackets	(as required)	(as required)	(as required)	(as required)	assembly
9100, 9600, 5120, 5140
TorqueMaster - Single and Double Spring

MANUAL	lubricating oil	pull rope	(1) Loose Winding Shaft (2) 3/8”- 16 Hex Nuts	1/4”- 20 Flanged Hex
	(as required)	(if included)	(SINGLE SPRING only)	Nuts (as required)

5/16” x 1 5/8” Hex Head Lag Screws	3/8”- 16 x 3/4” hex head	(2) #10 Phillips	(2) 3/8”-16 x 3/4”	1/4”-20 x 11/16” Self Drilling
(as required)	bolts (if included)	head screws	Truss Head Bolts	Screws (as required)

(4) 1/4”-20 x 5/8”	1/4”-14 x 5/8” Self Tapping	(2) #12 x 1/2” Phillips	(1) 5/16” x 1-1/4”	(1) COTTER PIN
Carriage Bolts	Screws (as required)	head screws	Clevis PIN
	Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer.			3

To find your Wayne-Dalton dealer; refer to your local yellow pages / business listings or go to Find a dealer area online at www.wayne-dalton.com