Wayne-Dalton AND 9600, 9400 installation instructions Package Contents

Package Contents	NOTE: Depending on the door model, some parts listed will not be supplied if not
	necessary. rear supports may not be included with your door.

		DOOR SectionS (as required)
(1) Center Bracket
assembly		(1)TorqueMaster® Spring tube
(2) Fully Adjustable RH/LH	(2) Quick Install RH/LH	(2) Horizontal Tracks RH/LH
Flagangles (as required)	Flagangles (as required)

U-Bar	idrive® Operator	(2) Horizontal Angles	Cable Drum Assemblies
		(21-15/16” or 80”)	(1) Right & (1) Left
(if required)	(sold separately)	(as required)

asymmetrical u-bar	Q.I. Jamb Brackets	(2) Top Bracket Slides	(2) Top Bracket Bases weather seal & nails	(2) Vertical
(if required)	(As Required)		(if included)	Tracks RH/LH

9100, 9600, 5120, 5140

TorqueMaster - Single and Double Spring

MANUAL

(1) Loose Winding Shaft	Drum Wraps	Rollers
(SINGLE SPRING Only)
	(1) Right & (1) Left
		(as required)	(1) operator bracket

End Brackets	pull rope	5/16”x 1-1/4” Clevis
(1) Right & (1) Left	(if included)	PIN & COTTER PIN	1/4”- 20 Flanged Hex
			Nuts (as required)

(2) 3/8”- 16 Hex Nuts	5/16” x 1 5/8” Hex Head Lag	(2) 3/8”-16 x 3/4”	1/4”-20 x 11/16” Self Drilling
		Truss Head Bolts
	Screws (as required)		Screws (as required)

(4) 1/4”-20 x 9/16” large	(4) 1/4”-20 x 5/8”	1/4”-14 x 5/8” Self Tapping (2) 5/16”Hex Nuts	5/16” X 18 X 3/4”
			CARRIAGE BOLTS
head ribbed track bolts	Carriage Bolts	Screws (as required)	(as required)

3

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com