Wayne-Dalton 9400, AND 9600 installation instructions Painting Continued

Models: AND 9600 9400

1 48
Download 48 pages 56.14 Kb
Page 46
Image 46
Painting Continued....

Painting Continued....

After surface has been properly prepared, it must be allowed to dry thoroughly, then coated immediately with a premium quality latex house paint. Follow paint label directions explicitly. Oil base or solvent base paints are not recommended. Please note that if substrate is exposed and not properly primed, painting with latex paint may cause accelerated rusting of the steel in the exposed area.

NOTES:

1.Repainting of finish painted steel doors cannot be warranted, as this condition is totally beyond the door manufacturer’s control.

2.If the finish painted steel door surface has a textured surface representing wood grain, stucco, etc., this step should not be attempted as danger of exposing substrate is greatly increased.

3.Consult a professional coatings contractor if in doubt about any of the above directions.

4.Follow directions explicitly on the paint container labels for proper applications of coatings and disposal of containers. Pay particular attention to acceptable weather and temperature conditions in which to paint.

46

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Page 46
Image 46
Wayne-Dalton 9400, AND 9600 installation instructions Painting Continued