Wayne-Dalton 9400, AND 9600 installation instructions Door Section Identification

	Door Section Identification
Tools Needed:	NOTE: This provides an alternative
	method for identifying your door
	sections/stacking position.
	Hinges are always pre-attached at
	the top of each section (except top
	section) and the hinges are stamped
	for identification, #1, #2, #3, and #4 (#4
	only on five section doors). See view
	below. The stamp identifies the stacking
	sequence of the section. The sequence
	is always determined by #1 being the
	bottom section to #3 or #4 being the
	highest intermediate section. See views
	to the right. If the stamp on the end
	hinge is illegible, refer to the section
	side view illustration to the right.
	The section side view illustration shows
	the end hinge profile of all the sections,
	and can also be used in conjunction
	with identifying each sections.
	The bottom section can be
	identified by #1 end hinges, the factory
	attached bottom astragal, and by the
	bottom bracket warning labels on each
	end stile.
	The lock section can be identified
	by #2 end hinge.
	The intermediate section can be
	identified by #3 end hinges. The section
	will have a warning label attached to
	either the right or left hand end stile.
	NOTE: #4 End hinges are used on the
	fourth section of five section doors.
	The top section can be identified
	with no pre-installed end or center
	hinges and U-bar attached to the top
	section.

Typical hinge stamping location

Warning label

#3	Top Section
	Warning label
#2	Intermediate Section
#1	Lock Section
	Bottom Bracket
	warning Labels
	Bottom Section
Astragal
	SECTION side view
7/8”	1 1/8”	1 3/8”	1 19/32”
#1 end	#2 end	#3 end	#4 end
	hinge	hinge	hinge
hinge
BOT.	LOCK	INT.	INT.

(USED ONLY

ON FIVE

SECTIONS)

BOTTOM

BRACKET

ASTRAGAL

4

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com