Wayne-Dalton 9400, AND 9600 Attaching Disconnect Handle, screwdriver, Screw

27	Attaching Disconnect Handle
Tools Needed:	NOTE: See idrive® main installation
Phillips head	instructions and owner’s manual for	Upper Position
	idrive® parts.
screwdriver		#6-20 x 1/2”
Wire cutters	Note: Bring motor to the down position
		Screw
	by pulling the disconnect cable, insure
	opener disconnect teeth are engaged
	before installing disconnect handle.
	Start the #6-20 x 1/2" screw into the
	disconnect handle. Thread the
	disconnect cable through the top of the	Handle
	disconnect handle bracket and then the
	disconnect handle.
	Locate the disconnect handle in full
	upper position of disconnect handle
	bracket.
		Disconnect	Emergency Disconnect
	Remove all disconnect cable slack	Cable	Label
	between the opener and the top of the
	disconnect handle bracket. Tighten
	#6-20 x 1/2" screw into the disconnect
	handle until snug, and then tighten	Disconnect
	screw an additional 1 to 1-1/2 turns to
	secure disconnect cable to the	Handle
		Bracket
	disconnect handle. Trim off excess cable
	from bottom of the disconnect handle.	Manual operated position	Motor operated position
	CAUTION: Pull Cable only taut
	enough to remove the Cable slack.
	Pulling the Cable more could
	cause Opener to disconnect from
	the TorqueMaster® Spring tube.
	Apply emergency disconnect label next
	to the mounted bracket. Use
	mechanical fasteners if adhesive will
	not adhere.
	Using the emergency disconnect, pull
	disconnect handle downwards and
	place it in the manual door operated
	position (Use disconnect label for
	reference). Motor will be rotated 90°
	from its packaged position.
	If motor does not pivot 90°, see
	troubleshooting section in the main
	installation instructions and owner’s
	manual of your idrive® opener

30

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com