Porter-Cable A17914-05-10-06, PCE1700 instruction manual Maintenance, Shutting Down

SHUTTING DOWN

1.After each use, if you have siphoned chemicals, siphon a bucket of clean water through the chemical hose. NOTE: Failure to do so will cause damage to the pump.

2.Place the ON-OFF switch in the Off position. NOTE: NEVER turn the water off with the motor running.

3.Turn water source off.

4.Pull trigger on spray gun to relieve any water pressure in hose or spray gun.

5.See Storage section in this manual for proper storage procedures.

MAINTENANCE

When performing maintenance, you may be exposed to hot surfaces, water pressure, or moving parts that can cause

serious injury or death!

Before performing any maintenance or repair, unplug unit from power source, let motor cool and release all water pressure.

To ensure efficient operation and longer life of your pressure washer, a routine maintenance schedule should be prepared and followed. If the pressure washer is used in unusual conditions, such as high-temperatures or dusty conditions, more frequent maintenance checks will be required.

Any maintenance or repair not listed should be performed by an Authorized Warranty Service Center.

CUSTOMER RESPONSIBILITIES TABLE

	Before	Every 25	Every 50	Every 100
		hours or	hours or	hours or
MAINTENANCE TASK	each use
		yearly	yearly	yearly
PRESSURE WASHER
check high pressure hose for	X
leaks
check soap and chemical	X
hose and filter
check gun and wand for leaks	X
prepare for storage	Prepare unit for storage if it is to remain idle for longer
	than 30 days
HIGH PRESSURE PUMP
check/clean inlet screen	X
check/change oil	*

* This pump does not require oil

MOTOR

Clean motor after each use. Using a cloth remove debris from motor. DO NOT use water to clean motor.

A17914 14- ENG