ASSEMBLY INSTRUCTIONS
1.To Assemble Quick Connect Grommets:
a.Squeeze grommet and place into hole, fitting groove to rim.
b.Push grommet into place.
c.Repeat steps until all grommets are assembled.
2.To Assemble Quick Connect Nozzles:
a.Remove four colored quick connect nozzles from plastic bag and insert them into correct
grommet. NOTE: Nozzles are color coded to match colored nozzles on panel.
3.Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place.
Risk of personal injury. Avoid
placing hands between handle and frame when assembling to prevent pinching.
4.Connect wand to gun. Tighten securely.
5.Attach high pressure hose to gun. Tighten securely.
NOTE: The pump on this unit is maintenance free and requires no oil, if there is a problem with the pump contact an Authorized Service Center.
Risk of bursting. Use a tire pressure
gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure.
NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the tire gauge to prevent over inflation.
A17914 | 8- ENG |