| Signal Description |
Signal Description | 2 |
|
|
The “#” symbol at the end of a signal name indicates that the active (asserted) state occurs when the signal is at a low voltage level. When “#” is not present after the signal name, the signal is asserted when at the high voltage level. The following notations are used to describe the signal type:
I:Input pin
O:Output pin
OD: | |
I/O: | Bidirectional Input/Output pin |
I/OD: | Bidirectional |
2.1On-Die Termination (ODT)
The Intel® 41210 Serial to Parallel PCI Bridge (also called the 41210 Bridge or the 41210) incorporates
Table 1, “ODT Signals” on page 14 lists the signals that have an
Intel® 41210 Serial to Parallel PCI Bridge Developer’s Manual | 13 |