Register Description
12.2.13Offset 20h: MBL—Memory  Base and Limit
Defines the base and limit, aligned to a 1 MB boundary, of the 
Note: Even though this region is 
These registers are cleared to all 0s on reset.
Note: This register must be programmed appropriately to enable or disable the space.
Table 47.  | Offset 20h:  | |||
  | 
  | 
  | 
  | 
  | 
Bits  | 
  | Type  | Reset | Description  | 
  | 
  | 
  | 
  | 
  | 
31:20 | 
  | RW  | 000h | Memory Limit (ML): These bits are compared with bits[31:20] of the incoming address to  | 
  | determine the upper 1   | |||
  | 
  | 
  | 
  | must be less than this value. | 
  | 
  | 
  | 
  | 
  | 
19:16 | 
  | RO  | 0h  | Reserved | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | 
  | Memory Base (MB): These bits are compared with bits[31:20] of the incoming address to  | 
15:4  | 
  | RW  | 000h  | determine the lower 1   | 
  | 
  | 
  | 
  | must be greater than or equal to this value.  | 
  | 
  | 
  | 
  | 
  | 
3:0  | 
  | RO  | 0h  | Reserved  | 
  | 
  | 
  | 
  | 
  | 
Intel® 41210 Serial to Parallel PCI Bridge Developer’s Manual  | 85  |