English
Removing the Damper
The printer is protected for shipping by | 1 |
a transportation damper that you must |
|
remove before you turn on the printer.
Open the printer by pulling the tab on the front cover, and remove the damper shown in illustration 1.
Note:
Reinstall the damper before shipping.
Using the Power Switch Cover
WARNING:
If an accident occurs with the power switch
cover attached, unplug the power cord 2 immediately. Continued use may cause
fire.
The enclosed power switch cover keeps the power switch from being pressed accidentally. To use the cover, install it as shown in illustration 2.
EPSON
| F |
|
|
| ORWARD | POW | |
R | EVERSE |
| ERRORER |
| R | SLIPRELEASE | |
|
|
| ELEASE |
Installing the Ribbon Cassette
Use the EPSON
CAUTION:
Never turn the ribbon cassette’s feed knob in the opposite direction of the arrow marked on the cassette; otherwise the ribbon cassette may be damaged.
1.Turn the printer on, and open the front cover by pulling up the tab on the left side.
2.Be sure the print head is on the right side.
3.If a ribbon is already installed, remove it by grasping the end of the tab and removing it from the printer.