Cisco Systems 2.5 manual Ios, Wds, Vlan

Chapter 2 Fault Descriptions

				Access Point Faults
Table 2-1 Access Point Faults (continued)
Fault Description	Type	Explanation	Related Setting	Recommended Action
AP is not registered	IOS	The managed IOS	Manage Fault	Verify that the WLCCP
with any WDS		access point is not	Settings >	credentials for wireless
		registered with any	Access Point >	domain services (WDS)
		WDS.	Thresholds >	are configured correctly.
		For Radio Manager	Registration	For more information, see
			Error
		functionality to		the managing devices
		work, all IOS		information in the online
		access points must		help or the User Guide for
		register with a		the CiscoWorks Wireless
		WDS. If an access		LAN Solution Engine,
		point is not		Release 2.5.
		registered, it will be
		excluded from all
		the Radio Manager
		procedures, which
		will provide
		incorrect results.
Broadcast Key	Non-IOS	The broadcast key	Manage Fault	Log in to the access point
Rotation is disabled	and IOS	rotation has been	Settings >	and enable the broadcast
		disabled.	Security	key rotation interval.
		When this fault is	Policies > Key
			Rotation per
		cleared, the
			VLAN
		following message
		displays: Broadcast
		Key Rotation is
		enabled.
Broadcast SSID is	Non-IOS	Broadcast SSID has	Manage Fault	Log in to the access point
disabled	and IOS	been disabled.	Settings >	and enable SSID for
		When this fault is	Security	broadcast mode.
			Policies >
		cleared, the
			Broadcast
		following message
			SSID Disabled
		displays: Broadcast
		SSID is enabled

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-3