Cisco Systems 2.5 manual EAP-MD5 server

Chapter 2 Fault Descriptions

				AAA Server Faults
Table 2-3 Server Faults (continued)
	Server
Fault Description	Type	Explanation	Related Setting	Recommended Action
EAP-MD5 server	EAP-MD5	The EAP-MD5 server	Manage Fault	Check the server
is not available		is not available.	Settings >	configuration.
		When this fault has	Thresholds > Leap >
			Response Time
		been cleared, the
		following message
		displays: EAP-MD5
		server is available
EAP-MD5 server	EAP-MD5	The fault threshold	Manage Fault	Verify that the fault
is Degraded		set for the degraded	Settings >	threshold is set
		state has been	Thresholds >	correctly.
		exceeded.	EAP-MD5 >	If the threshold is set
			Response Time
		When this fault has		correctly, review your
		been cleared, the		network to determine
		following message		the action necessary
		displays: EAP-MD5		to clear the fault
		server is OK		condition.
EAP-MD5 server	EAP-MD5	The fault threshold	Manage Fault	Verify that the fault
is Overloaded		set for the overloaded	Settings >	threshold is set
		state has been	Thresholds >	correctly.
		exceeded.	EAP-MD5 >	If the threshold is set
			Response Time
		When this fault has		correctly, review your
		been cleared, the		network to determine
		following message		the action necessary
		displays: EAP-MD5		to clear the fault
		server is OK		condition.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-21