Cisco Systems 2.5 manual Telnet Credential Fields Required

Chapter 1 FAQs and Troubleshooting

Firmware FAQs and Troubleshooting

Device Login Sequence	Telnet Credential Fields Required
Username:	User Name
Password:	User Password
prompt >enable
Password:	Enable Password
enable prompt #
Password:	User Password
prompt > enable	Enable Password
Password:
enable prompt #	(leave the User Name field empty)
prompt > enable	Enable Password
Password:	(leave User Name and User Password fields empty)
enable prompt #
enable prompt #	Not supported. Configure the device accordingly.

Symptom After conversion to IOS, the native VLAN information is not correct.

Possible Cause If VLANs are configured on non-IOS devices and none of them is configured as native, the conversion process automatically makes one VLAN native. This may not be the correct native VLAN. If more than one device is included in the conversion job, a different VLAN may become native in some APs.

Recommended Action Access the AP(s) via Telnet or the console and change the native VLAN to the desired one.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

1-31