Cisco Systems 2.5 manual Leap

Chapter 2 Fault Descriptions

AAA Server Faults

Table 2-3 Server Faults (continued)

	Server
Fault Description	Type	Explanation	Related Setting	Recommended Action
LEAP server is	LEAP	The LEAP server is	Manage Fault	Check the server
not available		not available.	Settings >	configuration.
		This can be caused if	Thresholds > Leap >
			Response Time
		you have enabled this
		policy and you are
		using a non-Cisco
		client with EAP.
		When this fault has
		been cleared, the
		following message
		displays: LEAP
		server is available
LEAP server is	LEAP	The fault threshold	Manage Fault	Verify that the fault
Degraded		set for the degraded	Settings >	threshold is set
		state has been	Thresholds > Leap >	correctly.
		exceeded.	Response Time	If the threshold is set
		When this fault has		correctly, review your
		been cleared, the		network to determine
		following message		the action necessary
		displays: LEAP		to clear the fault
		server is OK.		condition.
LEAP server is	LEAP	The fault threshold	Manage Fault	Verify that the fault
Overloaded		set for the overloaded	Settings >	threshold is set
		state has been	Thresholds > Leap >	correctly.
		exceeded.	Response Time	If the threshold is set
		When this fault has		correctly, review your
		been cleared, the		network to determine
		following message		the action necessary
		displays: LEAP		to clear the fault
		server is OK.		condition.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-22