Cisco Systems 2.5 manual Fault Description Type Explanation

Chapter 2 Fault Descriptions

				Access Point Faults
Table 2-1 Access Point Faults (continued)
Fault Description	Type	Explanation	Related Setting	Recommended Action
PSPF is disabled	Non-IOS	The PSPF port has	Manage Fault	Log in to the access point
		been disabled.	Settings >	and enable the PSPF
		PSPF (Publicly	Security	setting.
			Policies >
		Secure Packet
			PSPF Enabled
		Forwarding) is a
		feature that
		prevents client
		devices associated
		to a bridge or
		access point from
		inadvertently
		sharing files with
		other client devices
		on the wireless
		network.
		When the fault is
		cleared, the
		following message
		displays: The PSPF
		is enabled.
Retry Count rate is	Non-IOS	The fault threshold	Manage Fault	Verify that the fault
Degraded number per	and IOS	set for the degraded	Settings >	threshold is set correctly.
minute		state has been	Thresholds >	If the threshold is set
		exceeded.	Access Point >
				correctly, review your
			Max Retry
		When the fault is		network to determine the
			Counts
		cleared, the		action necessary to clear
		following message		the fault condition.
		displays: Retry
		Count rate is OK

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-13