Cisco Systems 2.5 manual Credentials Snmp

Chapter 2 Fault Descriptions

				Access Point Faults
Table 2-1 Access Point Faults (continued)
Fault Description	Type	Explanation	Related Setting	Recommended Action
SNMP query received	Non-IOS	The access point's	Manage Fault	Make sure the SNMP
authorization error		user community	Settings >	community string set on
response		strings do not have	Thresholds >	the WLSE (Devices >
		Admin, Ident,	Access Point >	Discover > Device
		Firmware, SNMP	SNMP	Credentials > SNMP
		privileges. The	Reachable	Communities) is the same
		WLSE might not be		as the string set on the
		able to access some		access point (Setup >
		SNMP information		Security > User
		from the access		Information).
		point that requires
		these privileges.
		When the fault is
		cleared, the
		following message
		displays: Device
		was reachable via
		SNMP.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-15