Cisco Systems 2.5 manual Fault Description Type Explanation

Chapter 2 Fault Descriptions

				Access Point Faults
Table 2-1 Access Point Faults (continued)
Fault Description	Type	Explanation	Related Setting	Recommended Action
Telnet access is	Non-IOS	Telnet has been	Manage Fault	Log in to the access point
enabled		enabled on the	Settings >	and disable the Telnet
		access point.	Security	access setting.
		When this fault has	Policies >
			Telnet
		been cleared, the
			Disabled
		following message
		displays: Telnet
		access is disabled
User capabilities are	Non-IOS	The enableUserMgr	Manage Fault	Log in to the access point
not enforced		setting is not set on	Settings >	and enable the User Mgr
		the access point.	Security	setting.
		When this fault has	Policies > User
			Manager
		been cleared, the
			Enforced
		following message
		displays: User
		capabilities are
		enforced.
Vlan WEP key length	Non-IOS	The WEP key	Manage Fault	Make sure the WEP key
policy violation	and IOS	length per VLAN	Settings >	length selected in the
		setting has been	Security	policy setting matches the
		violated.	Policies > WEP	access point settings.
		When this fault has	Encryption per
			Vlan
		been cleared, the
		following message
		displays: Vlan
		WEP key length is
		ok.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-17