Cisco Systems 2.5 manual Wlccp channel Thresholds Authenticate with Between the Wlse

Chapter 2 Fault Descriptions

				Access Point Faults
Table 2-1 Access Point Faults (continued)
Fault Description	Type	Explanation	Related Setting	Recommended Action
WEP key length	Non-IOS	The WEP key	Manage Fault	Check the WEP key
policy violation	and IOS	length setting has	Settings >	settings on the access
		been violated.	Security	point to make sure they
		When this fault has	Policies > WEP	match the WLSE settings.
			Key Length
		been cleared, the
		following message
		displays: WEP key
		length is OK.
WNM failed to	IOS	Authentication	Manage Fault	Verify that the WLSE
authenticate with		required to open a	Settings >	credentials used to
WDS.		WLCCP channel	Thresholds >	authenticate with the
		between the WLSE	WDS >	WDS are correct.
		and the WDS	Authentication	For more information, see
		failed.	Failures
				the managing devices
				information in the online
				help or the User Guide for
				the CiscoWorks Wireless
				LAN Solution Engine,
				Release 2.5.

FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-19