Cisco Systems 2.5 manual Wlse Fault, AAA Server Faults

Chapter 2 Fault Descriptions

WLSE Fault

WLSE Fault

Table 2-2 WLSE Fault

Fault Description	Explanation	Related Setting	Recommended Action
Dot11mib view is	The device is not configured	Manage Fault	Configure the devices and
not enabled on	with the iso (dot11 mib) view,	Settings >	the WLSE as described in
some Access	and cannot be managed	Thresholds >	Devices are placed in
Points. Please	effectively by the WLSE.	WLSE >	Misconfigured Devices
consult online help	This can cause some WLSE	Dot11mib view	group after discovery and
for details		enabled	dot11mib fault is
	report information to be missing
			displayed., page 1-16.
	and some WLSE faults may not
	be generated.
	When this fault has been cleared,
	the following message displays:
	No Dot11mib view
	misconfigurations detected.

AAA Server Faults

Table 2-3 Server Faults

		Server
Fault Description		Type	Explanation	Related Setting	Recommended Action
Authentication		EAP-MD5	The server is	Manage Fault	Make sure that the
failed. Please			reachable but the	Settings >	credentials are set
check EAP-MD5,			credentials are	Thresholds >	correctly by selecting
LEAP, PEAP, or			incorrect.	EAP-MD5 /LEAP/	Devices > Discover >
RADIUS			When this fault has	PEAP/RADIUS>	AAA Server.
credentials				Response Time
			been cleared, the
			following message
			displays:
			Authentication
			succeeded
	FAQ and Troubleshooting Guide for the CiscoWorks Wireless LAN Solution Engine

2-20