Cisco Systems CF2001P user manual Making System Setting, Checking the Date Setting

Page 21

CF2001P

NEXT

8.Making System Setting

■ Checking the Date Setting

1.Check that the External Panel Controller appears in the computer screen, and then display the Date/Time Input screen. (For details about displaying the Date/Time Input screen, refer to the Service Manual.)

C4004P565CA

3. Click [END].

C4004PU09CA

4.Click [Menu].

5.Check that the Basic screen appears on the External Panel Controller.

C4004PU07CA

2.Check that the current date and time settings are correct. If the settings are not correct, use the keypad in the External Panel Con- troller to enter the correct date and time in the upper row of the screen.

Example)

To specify April 1, 2001 15:30, click:

[2], [0], [0], [1], [0], [4], [0], [1], [1], [5], [3], [0]

C4004PU08CA

4004-7715-01	– 20 –

Image 21

Contents CF2001P Outline of the CF2001P System Setup Unpacking the Accessories UnpackingUnpacking the Printer Removing the Protective Tape and Packing Materials Installing the Imaging Units Installing the UnitsPacking material therefore, do not remove Clear plastic protective sheet is notShaded area, is only attached to Black imaging unitBe sure to install the imaging units in their correct slots Installing the Oil-Coating UnitBe sure to support the upper right-side door While carefully opening it otherwise, it mayRemove the oil-coating unit from its box Filling the Toner C4004U062AA Connecting the Cables Affix the label that corresponds with the installed optionsAffixing the Support Label Installing the Manual Holder Checking the Operation of the PrinterLoading Test Paper CF2001P Setting Up the Servicing EquipmentSetting Up the Converter Setting Up the Selector Tor Connecting the Equipment CablesRite Caliblation Click X-Rite Calibration in the Tech. Rep. Mode screen Dialog box appears if the auto-cal strip was read correctly Turn the cyan test pattern to its original ori If the cyan test pattern is read correctly Read the Pattern of Cyan disappears fromDialog box Checking the Date Setting Making System SettingSpecifying the Serial Number Specifying Who Performs Replacements Printing the List Click Image Processing Select the C Clear key to erase the entered number To set the Energy Save Mode parameterTo set the Sleep Mode parameter Tray Loading PaperSlide the lateral guides against the edges Paper Checking the Paper Reference Position for PF-118 Adjusting the OptionsClick PRT Area Adjusting the Paper Reference Position for PF-118 Click Machine Adjust Click Left Margin Pattern Do not measure from the back of the testChecking the Hole-Punching Positions for FN-107 Connecting the Telephone Cables Setting DT-105 USA and Canada onlyTransmission Settings Precautions for Connecting a Telephone to the Data TerminalDate/Time Settings Maintenance Center Billing Center Settings Clearing the Maintenance RAMEnter the service representative’s ID code If the number is not 6-digits long, add 0 at the beginning DT SettingsSetting the Telephone Number Initial Transmission Return