DCS 500 manual Speed Reference Setting for the Drive, To enter the Reference Setting, Mode

Chapter 3 - Handling of Control Panel CDP 31x

3.15 Speed Reference Setting for the Drive

Step	Function	Press key	Display after key is
			pressed

1.	Press one of these keys to get	ACT	PAR	0 L		0.0 rpm 00
	the status row displayed.			SPEED AC		0.0	rpm
				_
		FUNC		CONV CUR		0	A
				U ARM AC		0	V
2.	To enter the Reference Setting			0 L	[0.0 rpm] 00
	Mode					_
		REF		SPEED AC		0.0	rpm
				CONV CUR		0	A
				U ARM	AC	0	V
3.	To change the reference:			0 L	[219.0 rpm] 00
	(slow change)			SPEED AC		_	rpm
						0.0
				CONV CUR		0	A
				U ARM AC		0	V
	(fast change)
4.	To exit the Reference Setting	ACT	PAR	0 L		219.0 rpm 00
	Mode.			SPEED AC		0.0	rpm
				_
				CONV CUR		0	A
	The selected Keypad Mode is	FUNC	DRIVE	U ARM AC		0	V
	entered.

IV A 3 - 16 DCS 500B / DCP 500B Operating Instructions

3ADW000055R0401_DCS500B_Operating Instruction_e_d