Philips CDR 538, CDR 560 manual Synchronized digital recording CD-SYNC, Start digital recording

RECORDING

Start digital recording

1With the recorder stopped, press RECORD to enter the Record standby mode.

➜ RECORD will flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM			TRACK TIME CD SYNC
ANALOG				RECORD
				FINALIZE
PROG
				ERASE
		L		COPY
	RECORDABLE

•If DIG also flashes, the digital connection is incorrect.

Synchronized digital recording - CD-SYNC

SOURCE	DISPLAY
AUTO / MANUAL				TIME	CD SYNC	FINALIZE	CD	SYNCRO	STOP
										PLAY
					RECORD						PAUSE
	CDR	MINI CD	0	OVER		ERASE	RECORD
		RECORDER
					PAUSE				PREV	NEXT
POWER ON/OFF
								OPEN/CLOSE	RECORD LEVEL
									MIN	MAX

English

2To start recording, press PLAY and immediately start the source (from stop mode).

➜RECORD lights continuously. The track number and recording time used will be indicated on the display.

•To record a 3-second silence at the start of a track, press

PAUSE.

•To check the (remaining) recording time, press DISPLAY. (This can also be done during the recording.)

3To stop recording, press STOP on the CD recorder. ➜ RECORD will go out.

•To interrupt recording, press PAUSE.

➜ RECORD starts to flash. Resume at step 2.

After recording the display will show UPDATE for several seconds.

Note: With AUTO TRACK on, the recorder will stop automatically. Recordings from DAT or DCC will stop after 20 seconds silence. With AUTO TRACK off, the AUTO STOP mode is disabled.

Preparing for synchronized digital recording

The CD-SYNC feature enables you to make a fast and easy digital recording of a CD. Track increments are automatically detected from the digital source material. Track increments cannot be added manually.

1Make sure the disc is absolutely free of scratches and dust particles.

2Press Source repeatedly until (depending on the connection used):

➜DIG COAXIAL or DIG OPTICAL will appear on the display.

Start synchronized digital recording

1With the CD recorder stopped, press CD-SYNC.

➜On the display, CD-SYNC& SYNC appears. After a time, RECORD starts to flash.

DIG AUTO TRACK REPEAT 1 TOTAL REM	TRACK TIME CD SYNC
LOG		RECORD
		FINALIZE
PROG
		ERASE
		COPY

•If DIG also flashes, the digital connection is incorrect.

2To start recording, press Play on the digital source.

➜The CD recorder automatically starts to record and RECORD lights continuously. The track number and recording time used will be indicated on the display

•If you start the source during a track, CD-SYNC will not start recording until the beginning of the next track.

•To check the (remaining) recording time, press Display. (This can also be done during recording)

3To stop recording, press STOP on the CD recorder. ➜ CD-SYNCand RECORD will go out.

•To interrupt recording, press PAUSE.

➜RECORD will start to flash. To resume, press PLAY on the CD recorder.

13