RECORDING
English
After recording the display will show UPDATE for several seconds.
Note:
-The CD recorder will not start until it recognizes a digital signal. Although the reaction time is less than 200 milliseconds, the very beginning of the music may sometimes not be recorded. If this happens, you can start the recording manually (see digital recording- unsynchronized).
-Recordings from DAT or DCC will only stop after 20 silence.
Analogue recording
SOURCE | DISPLAY |
|
|
|
|
|
|
|
|
|
|
|
|
AUTO / MANUAL |
|
| TIME | CD SYNC | FINALIZE | CD | SYNCRO | STOP |
|
|
| ||
|
|
| PLAY |
| |||||||||
|
|
| RECORD |
|
|
|
| PAUSE | |||||
|
|
|
|
|
|
|
|
|
|
|
| ||
| CDR | MINI CD | 0 | OVER |
| ERASE | RECORD |
|
|
|
| ||
|
| RECORDER |
|
|
|
|
| ||||||
|
|
|
|
| PAUSE |
|
|
|
| PREV |
|
| NEXT |
POWER ON/OFF |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| O | PEN/CLOSE | RECORD | LEVEL | ||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| MIN |
|
| MAX |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Only make analogue recordings if digital recording is not possible.
Preparing for analogue recording
1Make sure the disc is absolutely free of scratches and dust particles.
2Press Source repeatedly until:
➜ ANALOG appears on the display.
DIG AUTO TRACK REPEAT 1 TOTAL REM | TRACK TIME |
ANALOG
PROG
3Press AUTO/MANUAL to switch between auto and manual track numbering.
➜If Auto is selected (preferred), AUTO TRACK appears on the display.
•AUTO: The track number is automatically incremented after a silence on the original of at least 3 seconds.
•MANUAL: Track numbers can be incremented manually by pressing §. (minimum track length is 4 seconds ). (This can also be done in AUTO mode)
•Track numbers cannot be changed after recording.
4With the recorder stopped, press RECORD to enter Record standby mode.
➜ RECORD will flash
DIG AUTO TRACK REPEAT 1 TOTAL REM | TRACK TIME CD SYNC |
| |
|
| RECORD |
|
|
|
|
|
|
| FINALIZE |
|
G |
|
|
|
| ERASE |
| |
|
|
|
|
5Play the source first to set the optimal recording level on the CD recorder.
6Adjust the REC LEVEL until all blue segments on the Record/Play Level bar light up but no red segments light continuously during the loudest passages.
7Stop the source.
14