Tripp Lite Single-Phase 10kVA owner manual Normal Operation, On Battery Alarm, Overload Messages

Page 13

Operation continued

Normal Operation

During normal operation, the first line of your LCD Display shows which operating mode your UPS is in: Online, Economy, On Battery, or Bypass.

Online mode: The UPS provides AC power while utility power is available and switches to On Battery mode instantly (zero transfer time) if AC power is interrupted.

Economy mode: The UPS provides AC power at high efficiency while utility power is available and switches to On Battery mode quickly if AC power is interrupted.

On Battery mode: The UPS provides AC power from battery backup so long as battery power lasts. It switches back to Online or Economy mode if utility power is available and shuts down if it runs out of battery power.

Bypass mode: The UPS provides AC power while utility power is available. The UPS shuts down if AC power is interrupted.

The second line of the LCD Display shows basic power conditions. Push the SCROLL buttons to browse through these basic power conditions in the sequence shown below.

XXXXMODE

LOAD = XXX% X.XXKW

XXXXMODE

IN = XXXV XX.X Hz

XXXXMODE

OUT = XXXV XX.X Hz

XXXXMODE

BATTERY = XXXVDC

On Battery Alarm

When in the On Battery mode, the UPS power module will beep to inform you that it is using battery power to support connected equipment. If its connected batteries are at more than half capacity, it will beep every two seconds. If its connected batteries are below half capacity, it will beep twice a second. If its connected batteries are nearly depleted, the UPS power module will beep continuously.

To silence the On Battery Alarm, press the “ON/MUTE” button.

Overload Messages

When the UPS detects an output overload, its LCD will switch to the following display:

OVERLOAD!

LOAD = XXX% X.XXKW

The UPS will then begin a countdown. If the UPS is still overloaded at the end of the countdown, the UPS will automatically go to Bypass Mode to protect its inverter. The duration of the countdown varies with the severity of the overload, as follows:

 

Overload Condition

Countdown Duration

 

 

102% - 125%

1 minute

 

 

125% - 150%

30 seconds

 

>150%

Immediate

 

 

 

 

13

Image 13
Contents SmartOnline Single-Phase 7.5kVA & 10kVA Important Safety Warnings Post Mounting Mounting RackPost Telecom Mounting Mounting Tower Power Module Front Panel Controls FeaturesBattery Module Power Module Detachable Power Distribution UnitPower Module Feature Description Features Rear PanelDetachable Power Distribution Unit Feature Description Battery Module Feature DescriptionHardwire the PDU to a Utility Power Source Hardwiring CautionsConnect the battery module to the power module Power onOptional Connection Power OFF optionalPlug Your Equipment into the PDUs Outlets Contact-Closure Communication Connection UPS Power/Battery Module RemovalRisk of electrical shock High Voltage WarningsStartup Self-Test OperationFailed Self-Test Normal Operation On Battery AlarmOverload Messages Shutdown Messages Bypass MessagesWarranty and Warranty Registration Storage and ServiceService Year Limited WarrantyManual del propietario Advertencias de seguridad importantes Montaje de 4 postes Montaje BastidorMontaje de 2 postes Telecomunicaciones Montaje en torre Controles del panel frontal del módulo de potencia CaracterísticasMódulo de batería Descripción de características del módulo de potencia Características Panel posterior continuaciónDescripción de características del módulo de batería Precauciones del cableado ConexiónConecte el módulo de batería al módulo de potencia EncendidoConecte sus equipos en el UPS Apagado opcionalOperación de derivación manual módulo de potencia Conexión opcional continuaciónRemoción del módulo de potencia/batería de la UPS ¡ADVERTENCIA! ¡Alto voltaje! ¡Riesgo de choque eléctrico Advertencias de alto voltajeAuto-prueba de arranque OperaciónFallo durante la auto-prueba Operación normal Alarma On BatteryMensajes de sobrecarga Mensajes de apagado Mensajes BypassAlmacenamiento Almacenamiento y servicioServicio Póliza DE Garantía Garantía limitada de 2 añosManuel de lutilisateur Avertissements pour Connexion de lEquipement Consignes de Sécurité ImportantesMontage à 4 supports Montage BaieMontage à 2 supports Telecom Montage Tour Caractéristiques Commandes de Panneau Avant de Module dAlimentationModule Batterie Description des Caractéristiques de Module dAlimentation Caractéristiques Panneau Arrière suiteDescription des Caractéristiques de Module de Batterie Précautions pour Câblage ConnexionConnecter le module de batterie Au module dalimentation Alimentation en Marche Connexion suiteAlimentation sur Arrêt facultatif Connecter votre équipement à lUPSConnexion Communication Fermeture de Contact Connexion en Option suiteMise en Garde! Haute tension! Risque de choc électrique Mise en Garde! Haute tension Risque de choc électriqueAutotest de Démarrage FonctionnementEchec de lAutotest Fonctionnement suite Alarme Sur BatterieFonctionnement Normal Messages de SurchargeMessages de Fermeture Messages de BypassGarantie Limitée à 2 Ans Entreposage et ServiceEntreposage Page 200607001 Manual del propietario Manuel du propriétaire Contactos en módulo de potencia/batería Español Français Introduction Post Mounting Mounting RackConnection Troubleshooting Warranty Registration Year Limited WarrantyManual del propietario Introducción Montaje de 4 postes Montaje BastidorMontaje en bastidor continúa Solución de problemas Condiciones Garantía limitada de 2 añosManuel de lutilisateur Consignes de Sécurité Importantes Conserver ces Instructions Montage à 4 supports Montage BaieMontage Baie suite Dépannage Numéros didentification de conformité aux règlements Garantie limitée à 2 ansÐóêîâîäñòâî ïîëüçîâàòåëÿ Page Ìîíòàæ Ñòåëëàæ Ìîíòàæ Ñòåëëàæ ïðîäîëæåíèå Òåõíè÷åñêîå îáñëóæèâàíèå Ãàðàíòèéíûå îáÿçàòåëüñòâà