5Communication
SELECT CUSTOM LAN CONFIGURATION
Instructions: Choose the desired contact configuration.
1> UTIL_FAIL is active closed, LOW_BATT is active closed
2> UTIL_FAIL is active open, LOW_BATT is active closed
3> UTIL_FAIL is active closed, LOW_BATT is active open
4> UTIL_FAIL is active open, LOW_BATT is active open
Q> TO QUIT THIS MENU
ENTER SELECTION >=>
Z > Set Baud Rate allows you to select a new baud rate The Select Baud
Rate Menu displays a list of baud rate options
|
| SELECT BAUD RATE |
2 | > | 300 |
4 | > | 1200 |
5 | > | 2400 |
6 | > | 4800 |
7 | > | 9600 |
8 | > | 19200 |
Q | > | QUIT THIS MENU |
ENTER SELECTION >±>
5To save the configuration settings, type S at the Main Menu prompt The UPS operates and communicates under the new configuration, and defaults to these settings each time it is started
If you want to abandon the selections you have made, type Q to quit
i NOTE Any changes you make to the UPS communications configuration must correspond to the communications equipment you are using. In particular, new baud rate selections for the UPS must match your communications equipment.
50 | #" ! " ! # 6$5$ I!!# |