Yamaha ERCX, DRCX, SRCD, SRCX user manual Setting the subnet mask

CHAPTER2 Ethernet Unit

2-4-3 Setting the subnet mask

This following explains how to set the subnet mask.

The subnet mask is a numerical address used to subdivide the network into smaller parts.

1)

Press

F3

(SYS) on the initial menu

screen.

[MENU]

select menu

EDIT

OPRT

SYS

MON

1

2

3

4

2)

Press

F4

(next) to switch the function

[SYS]

display and then press F2 (OPT).

select menu

SAFE

OPT

UTL

next

1

2

3

4

3)

Press

F4

(next) again and then press

[SYS-OPT]

F2 (MASK).

select menu

1IP 2MASK3GWAY4next

4)The currently set subnet mask is now dis- played. To change it, enter the new subnet mask with the number pad keys. (To move the cursor to right and left between peri- ods, use the XZ + or XZ - keys.)

When completely finished making the subnet mask entries, press the key.

5)The screen returns to the previous display in step 4.

[SYS-OPT-MASK] subnet mask

= 255.255.255. 0

[SYS-OPT-MASK] subnet mask

= 255.255.255.240

!CAUTION

When connecting the controller on an already existing network, always check with the network supervisor before making IP address, subnet mask and gateway set- tings.

14