Yamaha DRCX, ERCX, SRCD, SRCX user manual Setting the gateway

Page 21

CHAPTER2 Ethernet Unit

2-4-4 Setting the gateway

The following explains how to set the gateway. Basically this is specifying the router IP address. The router is a device relaying information from a certain network to a different network when two or more networks are present.

1)Press F3 (SYS) on the initial menu screen.

2)Press F4 (next) to switch the function display and then press F2 (OPT).

3)Press F4 (next) again and then press

F3 (GWAY).

[MENU] select menu

1EDIT2OPRT3SYS 4MON

[SYS] select menu

1SAFE2OPT 3UTL 4next

[SYS-OPT] select menu

1IP 2MASK3GWAY4next

4)The currently set gateway is now dis- played. To change it, enter the new gate- way with the number pad keys. (To move the cursor to right and left between peri- ods, use the XZ + or XZ - keys.)

When completely finished making the gateway entry, press the key.

[SYS-OPT-GWAY] gateway

= 192.168. 0. 1

5)The screen returns to the previous display

in step 4.	[SYS-OPT-GWAY]
	gateway
	= 133.210.201. 1

15

Image 21

Contents Ethernet Page Introduction Memo Ethernet unit control commands Robot control commands Setting the TCP/IP protocol12-1 Error messages 12-2 Telnet message list Ethernet UnitMemo Chapter System design safety points Basic safety pointsInstallation and wiring safety points Precautions when disposing of the unit Start-up and maintenance safety pointsWarranty Warranty descriptionWarranty Period Page Ethernet Unit Ethernet unit features Client How data is exchangedConnecting to Ethernet How to connect to EthernetValidating the Ethernet unit Making system settings for the controller serverThis following explains how to set the IP address Setting the IP addressM O Setting the subnet mask Setting the gateway Ethernet Unit Setting the TCP/IP protocol Making the PC settings clientEthernet Unit Checking the connection with ping Using Telnet Difference between Telnet and RS-232C communicationsRS-232C Telnet dedicated parameters Telnet dedicated parameters Setup method1CHEK2USER3PASS Idle no-reply timeout Tout communication timeoutDescription of Telnet dedicated parameters Port TCP port NoLIN-USER Login user name LIN-CHEK Login checkLIN-PASS Login password Lout Logout processingTelenet communication commands Communication command specifications@operation code Operand 1,operand2,operand 3 c/f l/f Robot control commands Ethernet unit control commandsTransmission example Response exampleMaking a connection with TELNET.EXE M O Displaying the MAC address Other operating tasksDisplaying the version of the Ethernet unit Error messages Message ListTelnet message list Symptom Probable causes Checkpoints Action TroubleshootingBYE Program Ethernet unit specifications SpecificationsModular connector UTP STP cable Straight-through cableCrossover cable Typical network systems SupplementCrossover cable Straight-through cable Terminator 10BASE-5 cable Transceiver MAU DSU Head office router 133.215.0.1 255.255.255.0 133.215.0.2 Description of terminology TCP/IP Transmission Control Protocol/Internet ProtocolTCP/IP protocols Ethernet 192.168.0.0/24 192.168.1.0/24 IP addressMAC address Media access control address Subnet maskRouter Ethernet