CHAPTER2 Ethernet Unit
2-12 Message List
2-12-1 Error messages
The following error messages involving the Ethernet system have been added.
ERROR
MESSAGE
No. 38
Message
Cause
Solution
net link error
•TELNET connection terminated due to error.
•A TELNET dedicated parameter is set so as to stop operation during logout processing.
•To end the TELNET communication use a LOGOUT or BYE command.
•Make setting with a TELNET dedicated parameter so as to continue operation during logout processing.
2-12-2 Telnet message list
| Message | login: |
| Meaning | Request for entry of login user name. |
| Response | Enter user name. |
|
|
|
| Message | Password: |
| Meaning | Request for entry of login password. |
| Response | Enter login password. |
|
|
|
| Message | login incorrect. |
| Meaning | Error was found during login check. |
| Response | Enter the correct user name and password. |
|
|
|
| Message | TELNET is disconnected!! |
| Meaning | Login check was made 3 times but errors were found so connection |
|
| was cutoff. |
| Response | Enter the correct user name and password. |
|
|
|
| Message | telnet is already used!! |
| Meaning | A TELNET connection has already been made. |
| Response | Limit the number of simultaneous logins to 1. |
|
|
|
| Message | timeout. |
| Meaning | Continuous communication time exceeded the time set on the TELNET |
|
| parameter timeout (time). |
| Response | Set a larger timeout (time) on the TELNET parameter so communication |
|
| time does not exceed the timeout. |
|
|
|
31