CHAPTER2 Ethernet Unit
2-8-2 TELNET dedicated parameters: Setup method 2
To set the user name and password for login, use the procedure below.
1)Perform step 1 through step 3 in
2)Select F1 (LIN) to display the submenu. Press F1 (CHEK) to set whether or not to make the LOGIN check. Press F2
(USER) to set the user name. Press F3 (PASS) to set the password.
3)If you selected F2 (USER) or F3 (PASS) in step 2, then a screen appears showing the currently set user name and password on the 3rd line.
4)To change the current user name and pass- word, select and enter one character at a time from the letters in the 4th line.
To enter those characters, use the XZ - or
XZ + keys to move the cursor to the char-
acter you want, and then press the 
key. If you enter the wrong character, you can erase it by pressing the BS key.
When finished entering the characters, press the ESC key.
*You can enter from 1 though 8 characters.
5)A check message next appears, so press
F1 (yes) to enter the new setting.
To abort any changes you made, press the F2 (no) key.
6)The screen returns to the previous display in step 3.
1CHEK2USER3PASS
= USER
ABCDEFGHIJKLMNOPQRST
= DRCX1
xyz0123456789!"#$%&'
1yes 2no
= DRCX1
ABCDEFGHIJKLMNOPQRST
22