Olivetti 145D Installation Language, Language English, Menu SET DATE/TIME, Set Date/Time Xx-Xx-Xx

Page 15

4.Press the keys

until the display shows:

INSTALLATION

LANGUAGE

5.Press the key:

The display shows the default language, for example:

LANGUAGE

ENGLISH

6.To display the other available languages, press the keys:

7.To confirm your choice, press the key:

8.To return the fax machine to its initial stand-by mode, press the key:

9.If you want to move back one function, press the key:

TO SET THE DATE AND TIME FOR THE FIRST TIME

The first time you connect the fax machine to the power supply or whenever there is a power failure you must set the date and time as described below.

The date and time will be printed at the top of all docu- ments sent and will be shown on the display when the fax is in stand-by mode.

Once set, the date and time can be changed at any time. You can also modify the format in which they are shown on the display, see "To change the date and time on the fax machine".

The display shows "AUTOMATIC 00" on the first line and "SET DATE/TIME" on the second line.

1.Press the key:

The display shows:

MENU

SET DATE/TIME

2.Press the key:

The display shows:

SET DATE/TIME

XX-XX-XX XX:XX

"XX-XX-XX XX:XX" indicate the date and time shown on the display for the first time having connected the fax machine.

3.To enter the new date and time (e.g. 10-09-07; 12:25), press the keys:

-As each digit is entered, the cursor will move to the next one.

4.If you wish to move the cursor to digits to be modified, press the keys:

/}

5.Then overwrite the digits with the correct ones, by press- ing the keys:

-

6.To confirm the setting, press the key:

The fax machine automatically returns to its initial stand- by mode.

notE

Stand-by mode is the status in which the fax machine is idle and is the mode in which the machine can be programmed. Stand-by mode will be shown on the display as follows:

•Without the original document inserted in the ADF.

AUTOMATIC 00

10-Sep-07 12:25

•With the original document inserted in the ADF.

DOCUMENT READY

NORMAL

note

Once set on the fax machine, the date and time are updated automatically on the cordless phone (if the device is within its operating range).

TO CHANGE THE DATE AND TIME ON THE FAX MACHINE

If the date and time shown on the display of the fax machine are not correct, you can change them at any time.

Bear in mind that if you have the caller ID function ena- bled, the date and time will be automatically brought up to date whenever you receive a call.

1.Press the key:

The display shows:

MENU

RECEPT. SET-UP

2.Press the keys

until the display shows:

MENU

FAX SET-UP

3.Press the key:

The display shows:

FAX SET-UP

DATE AND TIME

4.Press the key:

The display shows:

DATE AND TIME

SET DATE/TIME

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructions Date of publication September EDITED/PUBLISHED/PRODUCEDBYTable of Contents First Section Page To dispose of our devices correctly Safety PrecautionsConsulting the Manual Environmental RecyclingAbout the Installation and Setup Parameters Operating PrecautionsImproper USE FAX MACHINE’S Console About the ProductGives access to the Phone book Function key F2 Cordless Phone KeypadOr Communication icon Cordless Phone DisplayMaximum capacity 5 sheets of A4 ComponentsConnecting to the Telephone Line Power Supply Package ContentsInstallation Conditions Fax machine a Remove the lid of the battery comPartment as indicated by the ar RowsLingua English Menu InstallationInstallation Station Name Lingua ItalianoSET DATE/TIME XX-XX-XX Installation LanguageLanguage English Menu SET DATE/TIMEKey Installation TEL.LINE SetupThis procedure may only be carried out from the fax machine To switch from the public line to the private lineTo modify the dialling mode TEL.LINE Setup Line TypeTEL.LINE Setup Dial Mode Dial Mode ToneInstallation Station Number FAX SET-UP Various SettVarious Sett ECM FAX Header Outside Setting UP the FAX MachineVarious Sett FAX Header FAX Header InsideSET Date Date and Time SettingsCartridge LOW Change CartridgeTransmission Menu Print FUNC.LISTDocument Ready To Print the Menu and ITS FunctionsTo start receiving a document from the cordless phone, see RECEPT. SET-UP Reception ModeReception Mode Automatic ReceptionPut a telephone call on hold by pressing Using the TelephoneReception in PHONE/FAX Mode On LineIncoming Calls Û Outgoing Calls Ü Call Transfer Please WaitDo not place the document in the ADF Contrast Normal Remote Access On LineQuality High ZoomIf you want to abort the copy in progress, press Table of Contents Second Section Page To Send a Document To start sending the document, press the key To Adjust the ResolutionVarious Sett Contrast Contrast NormalOn Line To hear the dialling tones, press the key The display showsFrom the display, press the key Menu TX from Memory TX from Memory NEW SettingPrint Settings Confirm Settings YESTo Receive a Document RECEPT. SET-UP Reception ModeReception Mode Automatic TX from Memory EditMenu Phone Book ConnectingIf, when a call is received, you pick up the call before Phone BookEnter Name Phone Book NEW NumberType Position 01TYPE NameDELETE? To confirm the setting, press function key F2Phone Book Edit Phone Book DeleteTo confirm the setting, press function key F1 Display shows Delete Entry ?Phone Book Print Phone B To Print Reports and Lists Print Report Last TX Report Various Sett TX ReportTX Report For Failed TX Menu Print ReportFAX SET-UP Print Config Menu InstallationInstallation Station Name Installation Print InstallTo delete messages and memos that have already been played To Turn on the TADTAD Console Addition, from the cordless phone, you canTAD SET-UP ICM on Speaker Security and Access FunctionsSecurity SET Access Code Menu TAD SET-UPOutgoing Messages and Memos Record OGM #1 Lift Handset Record OGM #1 To RecordPlaying To SET the Length of Memos Incoming Messages To Delete Messages and Memos YOU have Already Listened to To Listen to Incoming Messages MemosTAD/FAX TAM MessagesNumber of messages remaining after deletion. In this case Type the access code on the remote telephone keypadDelete OLD MSG? Delete OLD MESSAGES?Toll Saver Special Functions of the Telephone Answering DeviceTAD SET-UP Toll Saver TAD SET-UP Announce onlyTAD SET-UP Print SET-UP To Print the TAD Configuration ParametersRecord OGM Lift Handset Record OGM To RecordPrinter Param Surplus Other Useful Reception SettingsFAX SET-UP Printer Param Printer Param ReductionNumber or name of the correspondent who called you To ENABLE/DISABLE Silent ReceptionRECEPT. SET-UP Silent RX Press the key Until the display showsRECEPT. SET-UP Ring Volume Installation TEL.LINE SetupTEL.LINE Setup Line Type TEL.LINE Setup Caller IDAutodetect Ring Ring Volume LevelInstallation DISTINCT. Ring DISTINCT. Ring SET OptionTo Change the Silence Lapse TEL.LINE Setup FAX/TEL TimerTEL.LINE Setup Silence Lapse To Change the Length of the Acoustic SignalBlack List NEW Number TEL.LINE Setup Remote ControlRemote Control YES RECEPT. SET-UP Black ListTo Modify the Black List 0TYPE NumberBlack List Modify Number Black List Delete NumberFAX Header Inside Other Useful Transmission SettingsBlack List Print List Various Sett FAX HeaderTo Regulate the Speaker Volume TEL.LINE Setup Line MonitorVarious Sett Buzzer Volume To raise or lower the volume of the speaker, press the keyTo ENABLE/DISABLE ECM Buzzer Volume LevelTEL.LINE Setup PBX Flash To ENABLE/DISABLE the Flash FunctionMenu Polling RX Receiving a Document in Polling ModePolling RX NEW Setting ECM YESTo Delete a Polling Reception That has Been SET Polling RX ChangePolling RX Delete To Change a Polling Reception That has Been SETHandset Ringer Melody Handset SettingsHandset Ringer Volume External VolumeHandset Name KEY TonesTo exit from programming mode, press function key F1 twice Alarm Repeat SettingsRestore Settings SET AlarmSearch for Basex Registration Please WAIT…Registration Register BaseExternal party is put on hold DE-REGISTER HandsetTransfer to Handset Internal Call to HandsetIf the Transmission is Unsuccessful What Happens When a Document isProblems on the FAX Machine What Happens if the Paper or INK has RUN OUTCode Message Cause of Error What to do Error CodesSignals and Messages on the FAX Machine TX Error Illegal SettingPaper ERROR, Press RX ErrorNEW Print CART.?, 1=YES 0=NO DiallingDOC.N Line on HOLD, Press HoldProblem Solution Problems on the Cordless PhoneMenu CART. Mainten To Replace the Print CartridgeWith the fax machine disconnected from the power socket Cleaning the Print Cartridge Testing the NozzlesTo Clean the Electrical Contacts Print Cartridge CART. Mainten Clean CartridgeLever, as indicated by To Clean the Optical ReaderOptical reader with a cloth Cated by the arrowTo Remove Jammed Documents To Clean the Casing To Remove Jammed Sheets of PaperTo Change the Batteries Cordless Phone Manufacturer Customer ServiceFax machine Battery chargerConnection Cleaning CasingSetting up Customer ServicePaper or ink has run out MaintenanceTroubleshooting Power supplySetup ResolutionRing volume SafetyTo set the black list 2006/95/EC dated 27th December Page Page FJ31 259749B-01
Top Page Image Contents