Chapter 1 Installation
Loading the Imaging Film
The printer unit in your fax creates printed text and images by applying heat to the imaging film, which causes ink to be transferred from the film to the page. Follow the steps below to install or replace the imaging film.
1 Press the release marked OPEN and open the print compartment cover.
• Caution! The printing head (the strip of metal on the underside of the cover) applies heat to the imaging film. It may be hot if a document has just been printed.
2 If you are replacing the imaging film, take the old film out of the printing com- partment and remove the three (3) green gears and the green flange from the ends of the spools.
DO NOT DISCARD THE GREEN
GEARS AND THE GREEN
FLANGE!
2