Chapter 8 Special Functions
Timer Operations
The Timer function allows you to set a transmission and/or polling operation to be performed automatically at a time you specify. One transmission operation and one polling operation can be set at the same time, and the times they will be performed can be specified up to 24 hours in advance.
As an example, you can use this function to take advantage of
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1 Press the keys shown at right. TIMER MODE will appear in the dis- play.
FUNCTION
1
2 Press "#" to set a transmission operation
(SEND MODE), or "*" to set a pollingor operation (POLLING MODE).
3 | Press "1" to select SET. | 1 |
|
|
|
|
|
|
|
| |
4 | Enter the time at which you want the op- | 0 | 9 | 2 | 5 |
| eration to take place (2 digits for the | ||||
| hour and 2 digits for the minute). |
|
| (Example: 9:25) | |
|
|
|
| ||
5 | Press "*" to select A.M., or "#" to select |
| or |
|
|
| P.M. |
|
|
| |
|
|
|
|
|
6 Press the START key.
START
67