Chapter 8 Special Functions
Using a Program key
A programmed operation is performed as follows:
1 Load the document.
2 Press the appropriate Program Key.
16/P1
35
(Example)
Note: A maximum of 2 timer operations can be set at any one time, including both timer operations set by pressing a Program Key and operations set as de- scribed in "Timer Operations" in this chapter.
To cancel a programmed timer operation
If a Program Key has been pressed for a timer operation and you need to cancel the operation before it is performed, follow these steps:
1
2
Press the Program Key. | 16/P1 |
| 35 |
(Example)
Press the START key. | START |
73