Muratec F-98 Erasing an empty F-Code box, 03Password 135*7#9, Code Doc Hold Time Hold Time0-31

Beyond the basics

If you do not want to enter or change this box’s password, skip to step 14. If you do want to enter or change this box’s password, proceed to step 13.

13 Use the numeric keypad to enter this box’s ITU-T-compatible password. This password can be up to 20 characters in length and include any combination of numbers and the * and # characters (but no other non-numerical characters). Here, we’ve entered 135*7#9.

03:Password 135*7#9_

Note: If you make a mistake or want to erase previously entered characters, press CANCEL to erase leftward. Or if you want to change just one character in the password, press to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the password is just as you want it.

14 Press ENTER to save the password. The machine asks for F-Code receiving document storage time. The LCD shows:

F-Code Doc Hold Time

Hold Time(0-31): 00

If you do not want to set or change the storage time, skip to step 16. If you do want to set or change the storage time, proceed to step 15.

15 Use the numeric keypad to enter a two-digit number indicating how long, in number of days (00-31), you want your fax machine to keep received docu- ments in this F-Code box. Here, we’ve entered 09, for nine days:

F-Code Doc Hold Time

Hold Time(0-31) :09

Note: Your fax machine can store incoming documents in F-Code boxes (up to 30 documents) as long as 31 days, after which it automatically erases the documents. However, if your machine has plenty of mem- ory, you may want to override the 31-day limit in order to keep the documents indefinitely (for you to delete manually when you choose). If so, enter 00. (You may wish to contact your authorized Muratec dealer regarding optional memory expansion.)

16 Press ENTER to save the settings. The LCD now shows:

03:Set F-Code Box Enter I.D. Code:0000

The machine asks for your F-Code box’s four-digit security I.D. code. This is the I.D. code for the box’s security, which you use to (1) print a document any remote F-Code-compatible fax sends to this F-Code box or (2) you enter before you can make any changes to this F-Code box.

If you do not want to change the I.D. code, skip to step 19.

If you do want to enter or change the I.D. code, proceed to step 17.

17 Decide on a four-digit I.D. code (0001-9999) for this F-Code box. Write it down, and put it in a safe place.

Important: After you proceed with step 18, you must know this code to print documents sent to this F-Code box.

Important: Do not use 0000 as an I.D. code.

18 Use the numeric keypad to enter the four-digit I.D. code for this F-Code box. 19 Press ENTER to save the F-Code box information.

To create or modify another F-Code box, repeat steps 3-19.

To finish, press STOP.

Erasing an empty F-Code box

You can erase an empty F-Code box (if a box has document received in it, you can- not erase it. See the first “Important” note after step 4, on the next page).

To erase an empty F-Code box:

1 Press PROGRAM, E, 4, ENTER. The LCD shows:

Select F-Code Box	or	Select F-Code Box
01:No Number Stored		01:Murata Machinery

If this is the F-Code box you want to erase, skip to step 3. (However, our examples from here will refer to F-Code box 03 rather than F-Code box 01.)

2 Use the numeric keypad to enter the two-digit identifier number (01-10) of the F-Code box you want to erase. Here, we’ve entered 0, 3 and see:

Select F-Code Box 03:Muratec America

3 If you change your mind and want to erase a different F-Code box, just go back to step 2 and finish it before going on to step 4.

2.30