Muratec F-98 operating instructions Programming a broadcast / group

Press ENTER, ENTER.

Press ENTER. The LCD now shows either

7 There’s a choice to make. Instruct your fax to carry out this delayed command in one of the following ways:

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 (i. e., 00), and then the time when the fax could perform the command:

Delayed

Enter Time: 00/17:05

8

9 The LCD now displays the next programmable one-touch key.

If you do not want to enter or change any other key’s programming, press STOP to return your machine to its usual standby mode.

If you do want to enter or change this key’s programming, go back to step 3. If you wish to enter or change another key’s programming, go back to step 2.

Programming a broadcast / group

Note: To erase a programmable one-touch key, refer to page 2.41.

Programming a broadcast is very similar to programming a delayed transmission except that, rather than specifying just one phone number, you set up multiple numbers to which the transmission should go.

To program a broadcast / group into a programmable one-touch key:

1 Press PROGRAM, C, 1, ENTER. The LCD either shows:

Select Program No.

P1:No Number Stored

… or indicates a command is already programmed into this key.

If P1 is the key you want to program, skip to step 3. (However, our examples from here will say “P4” rather than “P1.”)

Beyond the basics

2 Select the key in which you want to program a command or change a previ- ously stored command and then press it. Here, we’ve selected P4.

Select Program No.

P4:No Number Stored

3 If you change your mind and want to select a different programmable one- touch key, go back to step 2 before going on to step 4.

4

P4:Fax Number	or	P4:Fax Number
_		9-5558743_

5 Use the numeric keypad to enter up to 150 fax numbers — any combination of one-touch keys, speed-dial numbers and numbers you enter with only the numeric keypad.

Important: Do not press ENTER.

Between each number, press BROADCAST to enter a comma.

Important: Do not insert a comma after the last number.

To enter a speed-dial number, press SPEED DIAL/TEL INDEX and the number’s three-digit identifier.

P4:Fax Number

A,S006,9-5552400

Your display can show only 20 characters at a time. To view characters beyond those 20 (such as with an international long-distance number), press to scroll leftward or to scroll rightward.

Note: If you make a mistake or want to erase characters entered in a previ- ous setting, press CANCEL to erase leftward. Or, if you want to change just one character in the number, press to move the cursor leftward, or to move it rightward, to that character and press CANCEL to erase it. Then re-enter until the number is just as you want it.

6 If you want the broadcast to begin immediately every time you press this group key, press ENTER and skip to step 9.

If you want to delay the broadcast (perhaps to take advantage of lower phone

rates), press COM-OPTIONS,ENTER.

2.35