Muratec F-98 Dialing from the numeric keypad while using the PIN mask, 001PIN Number

Beyond the basics

1 Make a normal autodialer entry through the entry of the name. The LCD will show:

Set PIN Number

Enter Passcode :****

2 Use the numeric keypad to enter the four-digit passcode. Here, we’ll use our sample passcode again.

Set PIN Number

Enter Passcode :6296

3 Press ENTER. In our example, we’re setting speed-dial number 001:

001:PIN Number

_

4 Use the numeric keypad (including either * or #, if necessary) to enter the desired PIN, up to eight characters in length.

001:PIN Number 1057_

5 Press ENTER to save the PIN.

Note: If you press ENTER without entering the PIN, the fax machine beeps, indicates “Invalid Number” on the LCD and then returns you to step 3.

Now you may autodial the number as usual.

Important: While in PIN Mode 1, every autodialer number you use must include the PIN. This also applies to autodialer numbers used with program- mable one-touch keys (see pages 2.34–2.41).

If you’ve specified “Mode 2” — as you autodial, load the code

In this mode, you don’t have to add the PIN to the autodialer setting. Instead, you enter the PIN manually each time you autodial:

1 Perform the usual autodialing procedure for the number. Here, we’ve pushed one-touch key A. The machine now asks for the PIN:

Enter PIN Number

_

2 Use the numeric keypad to enter the PIN.

Enter PIN Number 1057_

3 Press START. Your machine will dial the number.

Dialing from the numeric keypad while using the PIN mask

Note: If the PIN mask feature is off, you dial normally.

If you’ve specified Mode 1 — use “star” power

1 Enter the phone number, then press the * (“star”) key and enter the PIN. The PIN always goes last. For example, to dial 19725550911 with a PIN of “123456”, enter 19725550911*123456:

Press Start 19725550911*123456

2 Press START. The PIN disappears from the display, and your machine dials the desired phone number.

If you’ve specified Mode 2 — the machine guides you

1 Enter the phone number as usual.

Press Start 19725550911_

2 Press START. The LCD now shows:

Enter PIN Number

_

3 Use the numeric keypad to enter the PIN.

Enter PIN Number 123456_

4 Press START. Your machine will dial the number.

2.48