7. Programmable Features
Feature/Code | Selection | |
Setting the auto | To answer a call with an extension telephone in TEL/FAX mode (page 34), | |
disconnection | activate this feature and program the code. | |
{#}{4}{9} | {1} “ON” (default) | |
| {2} “OFF” | |
| 1. | Press {MENU}. |
| 2. | Press {#}, then {4}{9}. |
| 3. Press {1} to select “ON”. | |
| 4. | Press {SET}. |
| 5. Enter your code from 2 to 4 digits, using | |
|
| L The default code is “;0”. |
| 6. | Press {SET}. |
| 7. | Press {MENU}. |
|
| |
Setting the scan contrast | To send or copy a document with faint or dark writing, set this feature | |
{#}{5}{8} | before transmission or copying. | |
| {1} “NORMAL” (default): Used for normal writing. | |
| {2} “LIGHT”: Used for dark writing. | |
| {3} “DARKER”: Used for faint writing. | |
| Note: | |
| L This feature is not available for photo and mixed resolution. | |
|
| |
Setting the Error | This feature is available when the sending/receiving fax machines are | |
Correction Mode (ECM) | ECM compatible. | |
{#}{6}{8} | {1} “ON” (default): If there is an error during fax transmission / reception, | |
| the fax machine will support the communication. | |
| {2} “OFF”: Deactivates this feature. | |
Setting flash time | The flash time depends on your telephone exchange or host PBX. | |
{#}{7}{2} | {0} “80msec” | |
| {1} “90msec” | |
| {2} “100msec” | |
| {3} “110msec” | |
| {4} “160msec” | |
| {5} “200msec” | |
| {6} “250msec” | |
| {7} “300msec” | |
| {8} “400msec” | |
| {9} “600msec” | |
| {*} “700msec” (default) | |
| {#} “900msec” | |
| Note: | |
| L If the fax machine is connected via a PBX, PBX functions (transferring | |
|
| a call, etc.) might not work correctly. Consult your PBX supplier for the |
|
| correct setting. |
|
| |
Changing the receiving | {1} “TEL” (default): Telephone mode (page 33) | |
mode in the manual answer | {2} “TEL/FAX”: Telephone/Fax mode (page 34) | |
setting |
|
|
{#}{7}{3} |
|
|
|
|
|
44