Ricoh FAX1400L manual Rectly. See P.11 Memory Transmission

Holsten1AE_Basic_FM.book Page 47 Monday, November 6, 2000 8:10 PM

	Solutions to Common Problems
Problem	Required Action
Frequent original misfeeds	Incorrect positioning of originals
(Multifeeds)	Put the document in the Automatic Document Feeder cor-
	rectly. See P.11 “Memory Transmission”.
	Incorrect alignment of originals
	Align the edges of the document. See P.10 “Suitable Docu-
	ment Types”.
	Curled pages
	Flatten the document. See P.10 “Suitable Document Types”.
	Incorrect document type
	Use a proper document type. See P.10 “Suitable Document
	Types”.
	Mixed document types	4
	The pages must all be of the same type.
	Static electricity on the originals
	Shuffle the document. See P.11 “Memory Transmission”.
	User maintenance is needed.
	Do user maintenance, especially roller (1). See Chapter 9,
	“Cleaning the Rollers and Scanner" in the Advanced Fea-
	tures manual.
Frequent original misfeeds	Copier silicone oil on the originals
(Non-feeds)	Wait a few minutes, and then try again.
	Incorrect alignment of originals
	Align the edges of the document. See P.11 “Memory Trans-
	mission”.
	Curled pages
	Flatten the document. See P.10 “Suitable Document Types”.
	Incorrect document type
	Use a proper document type. See P.10 “Suitable Document
	Types”.
	Do not place more than 30 pages (80g/m2) in the Automatic
	Document Feeder at once.
	If document types are not appropriate, or documents are
	damp, reduce the number of pages then place the docu-
	ments in the Automatic Document Feeder.
	User maintenance is needed.
	Do user maintenance, especially rollers (1). See Chapter 9,
	“Cleaning the Rollers and Scanner" in the Advanced Fea-
	tures manual.

47