Sterling 682.88107.00 specifications Appendix, Optional Components

Chapter 7: Appendix

7-1 Optional Components

The following is a list of options which your portable hot oil tcu may have been equipped with:

•Drain valve

•Hour meter; measures total pump run time hours

•General fault visual alarm

•Autovent sequence; deducts available

•Low level alarm; deducts available

•High level indicator light

•Manual bypass; deducts available

•M2B+ microprocessor controller options include:

•4-20 mA remote set point and retransmission

•SPI protocol, RS-485

•General protocols, types RS-232, -485

•Remote sensor; 10 Ft. (3m)

•Heat exchanger options of 3.9 sq. ft. (0.3627 sq. m) and 6.7 sq. ft. (0.6231 sq. m)

•Remote controller

•Lexan cover

•Optional operating voltages of 208/3/60, 230/3/60, 575/3/60, 380/3/50, and 415/3/50

Upright Portable Hot Oil TCUs Chapter 7: Appendix 39