Reviewing and Adjusting Basic Station Settings
Reaching and Reading the Station Operator Screens
The 24/128 Controller has a Station Operator Settings screen for each station, as shown below. This screen enables you to review and adjust all basic settings for the station.
To reach the Station n Operator screen:
1.Go to the Station Status screen, if needed.
To reach this screen from any other screen, touch Stations on the
2.Touch and hold the icon for the station, until the controller either prompts for the password or displays the Station n Operator screen.
Once you have entered the password (if needed), the Station n Operator screen appears:
Settings in the box labeled Convey, the red Priority Convey Activate button, and the menu controls on the
Buttons in light gray are settings that you can adjust at this screen. Boxes in dark gray are for display only. If a pump assignment or purge setting needs to be changed, this must be done at the Station n Setup screen.
Navigating among the Station Operator Screens
The controls in the upper
1.To display the screen for the next
2.To display the screen for the next
3.To display the screen for a specific station, touch Goto. A keypad pops up. Enter the number for the desired station. Use ← to erase any mistakes. Use ↵ to enter the value.
4.To exit to the Station Status (or Pump Status) screen, touch Stations (or Pumps).
Chapter 4: Operation | 56 |